Mystical Wonders Discussion Group

zetrone · Joined: 13 Jun 2010 Posts: 200

Hello: I was thinking about all the information I have recently DIGESTED about scalar zpe healing wands, and scalar waves etc.

Tell me what you think? If one took a laser pointer and passed the beam through a diffraction grating slipped on the front, it should produce interferance patterns. In the pattern there would be areas of DISTRUCTIVE interferance where the light waves from the laser were 180 degrees out of phase. These areas show no laser light only a dark region. These regions should have scaler waves replacing the electromagnetic scalar light waves.

If one simply passed this modified pointer laser over an area to be healed the scalar waves would impact the area. Swinging the pointer back and forth over the area would assure that scalar as well as the visable laser light impacts the area.

It would seem reasonable to think that the frequency of the scalar waves produced in the above fashion would be the same as that of the light from the laser. As to whether that particular frequency of scalar waves would HEAL I do not know???

David

zetrone · Joined: 13 Jun 2010 Posts: 200

Hello again: I am not really familiar as to what the diffracted laser beam looks like so I went to YouTube. Very colorful LIGHT SHOWS with that sort of thing. I was supprised to see a pattern of dots similar to what I remember the old Xray Diffraction patterns looked like on the blue laser.

The other videos were more familiar with a horozontal series of light and dark spots.

I have a high quality astronomy star diffraction eyepiece for looking at the spectra of stars through a telescope. Once I reassemble my two pointer lasers I will examine the diffraction patterns.

I think most pointer lasers have a focusing lense to get the narrowest beam. I will remove that from my lasers before passing the light throughthe grating.

The fundamental idea still is valid: if you STRIP away the magnetic and electric fields by 180 degrees out of phase interferance you will be left with the PRINCIPAL POINT of the scalar wave. And this will be where there APPEARS to be DARKNESS in the pattern.

David

Sorynzar · Guest

To test the theory one would need an instrument to detect scalar waves. There are a number of options available, but I was wondering what you would personally use to detect the scalar waves?

zetrone · Joined: 13 Jun 2010 Posts: 200

Hello again: I guess I would use the simple device T Bearden gave plans to. First I have to construct it.

I have run a red laser through a precision diffraction grating , I get a smeared out line but see no dark areas. This was a red laser for carpenter work. However when I bounce that same laser off a DVD surface I could see the dark areas. Also, while playi ng around with this my EMM UFO Early Warning Dterection Sytem went off. This detector has a flux coil and flux valve (whatever that means). It will detect Microwaves, Magnetic fields, ELF, and AC line current and is sensitive to impact. Recently i discovered that this detector will go off continuously without motion when placed stationary on top of a torridial magnet.

It may take TWO lasers to make this healing wand work....shot through the grating and allowed to interferer with each others wavefronts? A sort of Scalar Interferometer for healing.

David

Sorynzar · Guest

Instead of using diffraction from one laser source, why not try to cross two lasers with one another? You would need a laser with a visible wavelength to do this accurately. You could then mount the lasers so that their beams cross at 90 degress to each other, it would be interesting to see what the outcome of that would be? I have a feeling that using a diffraction pattern would emulate in some fashion the double slit experiments, so there may be something to using the diffraction as you suggested.

The Bearden device makes sense, then again, any sensitive magnet pickup coil inside a farady cage should produce an effect if placed near a scalar emission, I'm not sure a caduceus coil would be entirely necessary?

zetrone · Joined: 13 Jun 2010 Posts: 200

Sorynzar · Guest

Your joking? A battery and a speaker Smile

That has way to many flaws in it. I think anything shielded and grounded is a good option, first you need an established scalar wave emitter in order to test the detector circuit, otherwise it would be a shot in the dark.

danielpower · Joined: 14 Jun 2010 Posts: 1

The idea sounds terrific.

zetrone · Joined: 13 Jun 2010 Posts: 200

Yes, I will have to look up the info on that speaker battery thing. Undoubtable it would be VERY crude

There is a "LIFE ENERGY" meter for sale on Ebay. It is suppose to be a solid state version of reich's Orgone meter. It does not respond to EM but to LIFE ENERGY.....at least that is what they say.

I wonder if the meter would detect scalar waves?

I also wonder if the energy coming from those HHg (holy hand grande) are scalar? Also noone seems to have an explaintion as to what happend with a HHg.

There is also DANGER. Pulling energy out of the vacuum where it is enormously concentrated....and I have no idea what bioeffects occur with scalar waves as a function of frequency.

David

Sorynzar · Guest

I think they call those meters a heliognosis meter, or something similar?

Russian physicists used the unusual properties of tungsten to develop a detector. The resistance in the tungsten changes when in proximity to torsion fields, so that may also be something worth looking into.

At higher power scalar can have a negative effect on bio organisms. Mr. Logan of wizzers workshop says to modulate the scalar field in much the same way one converts DOR in an orgone device, by placing a quartz crystal near the field emission, he also says to use water.

zetrone · Joined: 13 Jun 2010 Posts: 200

Sorynzar · Guest

I can see her reasoning. To a layman, when someone talks of lasers they automatically think of ruby lasers burning metal or blowing stuff up. So going on this principle, it would be extremely dangerous to human beings Smile

Of course you are using a non burning laser, may I suggest using lasers set at 386nM wavelengths, if you can get hold of them. These would be ideal for working on biological organisms. If this is not your intention then you may find some interesting results from varying the wavelengths.

May I point out that a good tungsten detector is present in the form of a light bulb, or a lamp. I would like to experiment with a small electronics bulb, see if I can get some measurable signals from it in either varying resistance or, increased noise using the bulb as an input to an amplifier circuit.

The ParaPhysicists used two tungsten detectors either side of the torsion emitter, I'm not sure if they were standalone, or if they created a bridge?

I would love to experiment with high voltages and mobius coils. I have seen a couple of tesla coils on the market which stand about seven feet tall. One day, I keep telling myself, one day! Smile

You should still experiment with your ELF and the coil, Imagination is something a growing number of scientists seem to lack, dont let yours go to waste.

zetrone · Joined: 13 Jun 2010 Posts: 200

Sorynzar · Guest

I think orgone accumulators are in some way able to tap the vacuum energy. The latest theory suggests we are residing in a black hole universe within the wormhole of another universe. Inside every atom, there is an infinite amount of vacuum potential. I saw in Nexus recently a device invented by a few German engineers, these "crystal cells" as they call them tap the vacuum energy. The cells were comprised of a silica polymer matrix, this sounds very similar to orgone accumulators in some fashion.

I retract the statement I made recently about a 386nM laser, wrong wavelength. I have amplifier IC's on my mind at the moment, and it has manifested itself in that statement. The wavelength you should use is 686nM Visible red.

zetrone · Joined: 13 Jun 2010 Posts: 200

	Mystical Wonders Discussion Group Forum Index -> Energy Work	All times are GMT Goto page 1, 2 Next
Page 1 of 2