Mystical Wonders Discussion Group

Donna · Joined: 30 Apr 2006 Posts: 15 Location: England

Hi guys
Does radionics really work and how long does it take?

d_redant · Posted: Sun Sep 17, 2006 8:31 pm Post subject:

Yes it really works. Hundreds have people worldwide have been using it secretely to achieve their desires.

A good reference is Charles Cosimano. He has ebooks which show everything about the field of radionics.

It's a good start to get you into this amazing field.

Visit this site: http://psionics.mysticalwonders.org

nish007 · Posted: Sun Sep 24, 2006 7:33 pm Post subject:

I have used radionics and I think they work. they can be used to achieve a higher position at work or an increase in salary. The best use, I think, is to have it improve the health of someone or some people.

The problem is that I feel guilty about using it for attaining a higher position as I feel that its an unfair advantage, therefore I havent used it for this purpose.

Anybody else have any thoughts on this? Cool

RemoteControl · Joined: 09 Aug 2005 Posts: 157 Location: USA

Yeah, it really does work...it seems like audio amplifiers some how replicate the energy making your desire happen a lot faster than with traditional methods....

Donna · Joined: 30 Apr 2006 Posts: 15 Location: England

Hi
Thanks guys for the replies I know the machines are expensive but they sound as if they are worth it.

RemoteControl · Joined: 09 Aug 2005 Posts: 157 Location: USA

mack · Joined: 07 May 2007 Posts: 138

Radionics definitely work.

yourdost · Joined: 16 Nov 2006 Posts: 64

RemoteControl · Joined: 09 Aug 2005 Posts: 157 Location: USA

RemoteControl · Joined: 09 Aug 2005 Posts: 157 Location: USA

I tried it, it works...you should only keep it on for 12 hours at most or else the energy seems to disappear....also I think there's a better way, it seems what we call reality itself exists somewhere in the third-eye area....anyway have fun altering yourself into different universes

yourdost · Joined: 16 Nov 2006 Posts: 64

Well all you need is some computer speakers with an earphone jack (audio amplifier), which you probably already have, a few wires, antenna, and a copper plate, and thats it...I think you can do it for under $20.....

You take the end of the computer speakers that connects to the computer and tape it onto the copper plate (this is the input)
Then connect an earphone jack wire to an antenna....[/quote]

remote control sorry to say I really didnt get it.

RemoteControl · Joined: 09 Aug 2005 Posts: 157 Location: USA

rodan · Joined: 18 Sep 2014 Posts: 68

I think this is how you make a simple wishing machine from a pair of computer amplified speakers:

The speaker wire with input jack that normally plugs into your computer sound card/tower, I cut off the input jack, stripped about an inch off the two wires, to show the bare copper wire strands, taped each wire separately to a copper plate ( two small plates used with each bare copper strands of wire, one taped to each plate, separately )

You put your " intent and target " (a picture or short written note) and sandwich them together, between the two copper plates. I used paper clips to secure them, but, someone else might have a better idea on that.

Take earphones or headphones and plug into the " headphone jack " located in front of the speaker, stretching it out to act as an antenna.

Plug in the speakers electrical cord to power, push the button, sit, think, and focus on your intent you have between the two plates, long enough till you " feel " comfortable the intent is out into the ether. Leave it powered on, and forget about it. It's suggested to leave it alone one to two weeks.

The diagram:

http://www.charlescosimano.com/wishing-machine.html

( credits given to G. Harry Stine and Charles Cosimano )

I should say, a very, very simple wish machine, but, made with actual parts with amplifier. ( not passive )

If you haven't yet read what G. Harry Stine said about this, you would laugh and say this can't work. He included it in his book, and, says it does work, even though it's so simple.

Here is what it should look like when you are finished putting it together:

[img][URL=http://s1378.photobucket.com/user/rodan/media/Simple%20Wish%20Machine_zpsjl1an434.jpg.html]

[/URL][/img]

Take note the front of the left speaker, where the two knobs are, I have an earphone/headphone plugged in there, the other end strung up to act as an antenna.

Also, you can see the wires going from each copper plate that are sandwiched together with paper clips, the other end of wires go to the inside of the right speaker.

Note: I've thought about modifying this setup, by using only one copper plate for the intent, and, take the other copper plate, attach the " target " of the intent, onto the end of the antenna. I might try that and post the results. To me, this kinda makes more sense than the way I have the " intent & target " both, sandwiched together inside the two copper plates.

Let me know what you think about this setup, and what can be done to modify it to make it better.

rodan · Joined: 18 Sep 2014 Posts: 68

The way I have the two copper plates sandwiched together, powered on, could short out the amplifier.

I no longer use paper clips to hold together, and make sure the paper with the intent or target is layered and positioned to keep the copper plates from touching.

Another method I'm going to try is to keep the copper plates separate, grounding the negative lead from the amp, to earth ground.

	Mystical Wonders Discussion Group Forum Index -> Radionics - Psionics - Psychotronics	All times are GMT
Page 1 of 1