Joined: 13 Jun 2010
|Posted: Mon Jun 27, 2011 12:57 am Post subject: "PULSE" PEMT, A nanosecond pulse rate for your las
|Hello: I would think that most people here are familiar with the theraputic effects that ALL types of PULSES seem to have. (e.g. Y Clark, R Beck, R Rife)
Well now there is a way you can add one billion pulses per second (NANOSECOND)to your red laser pointer or any other diode laser you may have.
Google for a project that describes the circuitry and procedure for measuring the sped of light with a nanosecond pulsed red laser. Forget the main experiment, build the equipment and pulse your laser. Then see the theraputic effects
The circuitry is rather simple and the whole idea for generating the pulse is to overload a avalanche transistor......just barely to get it to pulse at a nonosecond to 500 picosecond range. The overload is provided by a voltage doubling circuit you can build with Radio Shack parts that changes an AC transformers 30 volt output into a 60 volt DC output that is controlled with a potentiometer.
To provide bias voltage to the red diode laser you can slap together a voltage regulator and a fe wother parts. I ordered most of what I need to do this project from Dan's Small Parts and Kits.
You can build this whole thing on a breadboard, however to obtain very fast pulses I would suggest soldering everything as close together as possible.
I want to add this PULSE to a 100 milliwatt red laser I have built and use on my gums and teeth. The theraputic results I expect to increase with the PULSE.