Mystical Wonders Discussion Group

Krylon · Joined: 24 Jun 2006 Posts: 26 Location: miami

no it didn't really ruin my life i was just caught up in the moment n thought it did. but really its a memory id rather not speak about thnx

Desertman · Joined: 08 Jul 2005 Posts: 6 Location: Western USA

Hello group,

Well, it's been a couple of years since my last post, and I was getting interested in this Stine's Wishing Machine subject once again.

I was going over some of the emails from LuckyLouie, and others that have had success with it.

I have just ONE thread to contribute here, and it's very informative on the subject........

http://www.freedomfiles.org/technology/quantum/qebasics.htm

SO, I hope some of you let me know how you are doing on this subject and if any of you have any NEW recommendations of the Wishing Machine.

Desertman

Black Cat · Site Veteran Joined: 14 Feb 2007 Posts: 500

Can I use the diagram of the wishing machine that was posted, or do I have to make my own graphic? I want to try the "flashing image" thing on my computer and see if it works.

Desertman · Joined: 08 Jul 2005 Posts: 6 Location: Western USA

Hello Black Cat,

I am just like you. We are all just Pioneers, and experimenters!

Remember that these devices are Props and Tools for the focalpoint of the MIND. Ones concentration and focus on ones INTENT is what manifestes ones desires while using these machines. Although, These devices ARE very important and AMPLIFIES ones intent dramatically, I believe, and other people I have read about do too!

I hope you liked the Blue Page like in my last email. It's one of the most informative papers I have ever read on Radionics and the mind!

Your methods are as good as the others.

I hope lucky Louie is still with the group.

If the Moderator has any recommendations on the Wishing Machine then I would appreciate it. It seems the subject has somewhat gone away. Pity...

I plan to make one very soon, myself. Simple, huh!

Got to go.

Desertman

Black Cat · Site Veteran Joined: 14 Feb 2007 Posts: 500

Hi Desertman, thanks for the advice! I'm so new to all of this. I haven't read your link yet, but I will do so over the next day or so. I have some free time this weekend so I'll experiment and see what I can get to happen!

batm261 · Joined: 28 Jan 2007 Posts: 15

I like RemoteControl's explanation to the working of these machines although I have not yet tried anything myself.

I wonder what works the best:

A: self constructed simple hardware based wishing machine
B: software like Cybershaman (some people even paid the maker over 700$ for the professional version!)

Any opinion with argumentation is greatly appreciated, thanks!

ColinGS · Joined: 30 Mar 2007 Posts: 74

RemoteControl · Joined: 09 Aug 2005 Posts: 157 Location: USA

ColinGS · Joined: 30 Mar 2007 Posts: 74

Another problem I have with them is that they're one source of energy that's gonna produce a limited amount and you can't always leave it on. Even with a boot up sequence on your computer that takes only 10-15 seconds, you gotta have a bunch of other things on and running, just so you can have the small amount generated for the program and many times, it's gotta make a sound. The wishing machine can be soundless to human ears. One segment of a continuously repeated arrangement of notes gets highly irritating after a while. And all this extra stuff running costs you more power. It's better to find a tape player that's got a spot to plug a power cord in that gets shoved into a wall outlet and let it be. When I made my first wishing machine, I bought a Sony from circuit city. It cost me like 25 buck and it's got a mic jack, an earphone jack and a power cord jack. It's even got a carrying handle, if I wanted to move it that way, but if I move it, I just scoop up the brass hing I'm using to hold the result and the earphones at the same time as the player because I leave them up against each other and the thing worked for me.

The reason you can listen to music for hours on end and feel really happy is because the notes change. Even when it comes to people that just play the crap out of songs, like I often do, the notes are gonna change for a few minutes before they repeat again.

guitarnut · Joined: 08 Mar 2007 Posts: 23

My idea of a modified Wishing Machene, would be to use a two stage, audio pre amp. with trim pot's between each stage, the first preamp, would be connected to the copper plates, then driven in to the input of pre amp #2, at this point you would use the first trim pot, around 600 OHM. then connect the out input from a tape recorder etc, after the trim pot, then in to the input of preamp #2, at the out put of pre amp #2 would be another trim pot, around 1K OHM.

Thought waves are believed to be Bell shape, so you would use a scope, on the output of amp#2 and then adjust the pot's to acquire the appropriate wave form.

Then pump this signal in to any D.C. coupled amplifier, such as a Crown DC 300 A giving you a power level of about 600 Watt's

For the antenna, I would think maybe a tesla coil tuned to earth frequency 7.82 HZ with a ground rod on one end of the secondary, of the coil, and your antenna wire connected to the other.

The idea here is to optimize, and amplify the signals.
any one here have any input on this one?

ColinGS · Joined: 30 Mar 2007 Posts: 74

I never thought about using a trim pot before. That's interesting.

abundans · Joined: 07 May 2007 Posts: 4

I m building a wishing machine by that plan with amplifier and I have some questions.

I use Sony stereo line and using AUX for input not mic (alu foil with cardboard not copper plates) and earphones as output.

1.) Does it matter if the amplifier is stereo?
2.) If I use a big TV antenna or even satelite dish for output would it be more poverful?
3.) Could I use speakers as output?
4.) What is the best way to connect input (copper plates) to amplifier?
5.) If I use a big TV antenna or satelite dish, where should I put the output wire?

Thank you for all your help.

wasiu0607 · Joined: 27 Mar 2007 Posts: 15

I just read about the Wishing Machine by Mr. Stine and I am a little dull when it comes to building things.

Q1.) So basically I glue tin foil onto a sheet of posterboard, and then folding it so that the tin foil is on the inside?

Q2.) The next step, which is to attach speaker wires to the posterboard, do I glue it or tape it? Also, the speaker wires I have do not have a plug, so how am I suppose to plug it into my computer?

Q3.) For the photos, if I want to influence another person, do I place their photo on top of my photo in-between the foils?

Hope someone can answer these questions.
Thanks a lot![/img]

Desertman · Joined: 08 Jul 2005 Posts: 6 Location: Western USA

Hello Group,

Hey, Time flies since my last post. I, too was impressed with LuckyLouies posts from a couple of years ago, and emailed him on occasion.

It's GREAT that this group has NEW member that are Serious about Stine's gadgets, AND Pavlita's Psychotronics gadgets that he marveled the world with a few decades ago.

You guys have rekindeled my enthusiasm with this subject and I will try to build one, soon. Hey, I have read that EVEN a Diagram of one will prove successful, too!

In the past few years I have accumulated a lot of web pages on this subject and when I get a chance I'll share some with you.

One thing that has stuck out in my mind over the past 20 years or so while studying Golden Dawn (among other things) is Reguardie says on the first few pages of his find book something like "All magick originates (comes from) the Mind".

I know I'm going over old ground but for one of the best web pages there is (again) see this:

http://www.freedomfiles.org/technology/quantum/qebasics.htm

Lastly, I'll share with you some VERY convincing information on the subject of nearly ALL PSI and Psychotronic devices that I got in a personal email from Lifetechnology.org a couple of years ago in response to a question about their products and it is just great so read this:

"one reason why high magick rituals are structured like this is becsuse the symbolism is used to convey the message to the subconscious mind.

becsuse the conscious mind is focussed on the ritual in hand the real intention is allowed to slip past into the subconscious.

it is in the subconscious mind where all interpretation of the real world data takes place and it is our subconscious beliefs which mould all of the incoming sensory data to create our world.

the hidden dorway to the subconscious is the secret key to all magick."

best wishes
aurum solis
_www.lifetechnology.org_ (http://www.lifetechnology.org/)

Well, that's what they wrote back to me. Great stuff, huh! WE are the ultimate power and these great little machines are the "Props", in my opinion.

I just LOVE this concept of the Wishing Machine. Don't worry about the details or specifics, in my opinion just do your best with what materials you have. EVEN PAPER AND PEN!

got to go for now, but Wheres Luckylouie?

Desertman

	Mystical Wonders Discussion Group Forum Index -> Radionics - Psionics - Psychotronics	All times are GMT Goto page Previous 1, 2, 3, 4 Next
Page 3 of 4