Mystical Wonders Discussion Group

whitelotus · Joined: 10 Jan 2012 Posts: 54

I have drawn out the schematics by hand and I dont have a scanner. I'm planning to write out a detailed manual if my machine works later.

There are still a few ambiguities in it that I have to dowse out. What I am saying is it does contain most of the info required to build it and if you take out the time and effort you can figure it out.

kullark · Joined: 24 Nov 2011 Posts: 21

whitelotus · Joined: 10 Jan 2012 Posts: 54

http://www.angelfire.com/clone/disclosure666/

kullark · Joined: 24 Nov 2011 Posts: 21

kullark · Joined: 24 Nov 2011 Posts: 21

whitelotus · Joined: 10 Jan 2012 Posts: 54

I posted that by mistake.I know its nothing new.

You are so interested about the machine at one point and at the slightest hint you conclude it wouldn't work. with that attitude I doubt this or any machine would work for you at all.
How about keeping an open mind and a little patience?

kullark · Joined: 24 Nov 2011 Posts: 21

kullark · Joined: 24 Nov 2011 Posts: 21

Is there anyone who knows what that "coiled pencil" is at the plans of this machine????

kullark · Joined: 24 Nov 2011 Posts: 21

well i think noone knows what the coiled pencil is. Anyway i have an other question that people with experience should know... the dials of the machine are in series conected or in some other way? (on the plans the author says nothing about this and i wanded to ask if someone has figure this out...thanks)

whitelotus · Joined: 10 Jan 2012 Posts: 54

I'm not sure what a coiled pencil is. Three are three antennas in the machine. 1) One is a telescopic antenna with a caduceus coil which you connect to the pyramid on the left

2) The other is a caduceus coil inside the box that is connected to the charge sheet and motor

3) I'm not sure about the coiled pencil but it can only be the "mini ant" in the big picture and it should be connected to the stick pad

Now I dont know what a coiled pencil is made of- I'm going to just coil a copper wire around a pencil and call it a mini antenna. Graphite is used in Potentiomater wiring.So I'm guessing the graphite in the pencil has some part to play.

kullark · Joined: 24 Nov 2011 Posts: 21

thank you very much for your reply whitelotus. I am building the machine and i have it allmost ready but i have some questions if you have figure it out. tha copper plate from the computer screen...do you know where in the box do you conect the cable from it? and the grounding cable? (again from the same copper plate. is it the same? and where do you conect that cable?) and the second one.... it has to do whith the plates ander the pyramids. how do you conect them and what about the copper rods on the side of the main pyramid? how does they conect to the box. (and i think the last one... the coil under the second plate...have you figure out how this is conected to the rest of the box?)

again... thank you very much for your help

whitelotus · Joined: 10 Jan 2012 Posts: 54

Hi Kullark,
Its great you are building this machine.
I'll tell you from what I understand.

1)You connect the copper screen from laptop to the small copper bowl(n which you put one charged crystal in) on the pad. This is mentioned in the document.Although in the big picture there is a yellow wire that clearly runs from the screen to what is marked on the grounding clip!

2)Grounding wire connection is not mentioned in the diagram. infinitelight
in his machine connected it to the copper sheet under the pad. Dunno if this is right. In the big pic the yellow wire is on the right so I'll also be connecting it to the pad.

3)About the plates: All the connections can be clearly deciphered from the schematic pic and the photo. It'd be cumbersome to put it in words but its there. Making your own schematic on another paper helps.

Coil under the 2nd plate is connected to the south side of pyramid. This again is mentoned clearly.

I'd suggest read the document over n over, look at the pictures n it decipher as much as possible.

I have a few doubts that arent mentioned clearly in tere. Like when to switch off the red light n what a 300000 candlelight is. He says to shine a red light on it n then a 2aa flashlight tll the btteries go off n not to shine any more light. Does anyone understand that part?

kullark · Joined: 24 Nov 2011 Posts: 21

Hi there Whitelotus
I will tell you what i have figured out about your doubts with the lights. The author somewhere on tha fotos or the shematics says "a red light always sines on this plate" - main plate, so i think that the red light should be allways on to shine on that plate. As for the 400000 candlelight... well i think from the descreption that this is just a flashlight whith that kind of power (flashlights are measured that way of how bright they are) and you have to direct its beam on the main gold pyramid. The 2AA batteries is mensioned because with these batteries the light shoud last about 10-20 minutes and then the batteries will be dead so no more light (if the batteries was 2 D type then they whould last for 1 or more hours and we dont want the light on the main pyramid for so much time). I hope this helps

P.S in which shematic pic are the conection of the plates? i think i am missing something here. And something else... the coil under the second plate has 2 ends. the one end to the south of the main plate...the second end???? or we should join the 2 ends???

whitelotus · Joined: 10 Jan 2012 Posts: 54

Thank you.
I thought they were two different lights- The red light shown in the big pcture clearly is connected to the plug board so is not battery operated.
Under the instructions Step 21 is different from 24. So i'm not very sure about that.

As for the coil I will probably attach the wire to the bottom end. I thinkk the crystal acts as an antenna n in that case we want the energy directed upwards.

And the plates: refer to ccoloured schematc and the close up of the left part of box. Put 2 n 2 together. Takes some time but definitely there.

And dont forget to put an orgone sheet, 2 crystals and a copper bowl for charging beforehand for a month. So by the time u complete it yiu'll be able to run it.Just a thought.

kullark · Joined: 24 Nov 2011 Posts: 21

Thanks whitelotus

I think that this is the way for the lights... a red one always on the plate and a flashlight for 10-20 minutes

I will try again with the plates conection even though i dont understand the shematics very clearly there

P.S they are charging allready Smile

	Mystical Wonders Discussion Group Forum Index -> Radionics - Psionics - Psychotronics	All times are GMT Goto page Previous 1, 2, 3 Next
Page 2 of 3